Separator

The Tehnix separator is completely made according to HRN EN 858 with integrated precipitator and coalescent insert. It is entirely in the function of environmental protection and groundwater conservation.It is foreseen for the separator to be installed in the ground by burying (only the service covers remain on the ground level), but there is a possibility of surfaced installation. Slide throats adapt to the terrain. By performance, the separator belongs to the 1st class (EN 858). The residual oil concentration in the output water is less than 0.5 mg / liter of water.
The separator is protected from corrosion by special tar epoxy resins.Maintenance is minimal and it includes controlling the amount of oil in the separator and a disposal of the separators content.

Send inquiry

Technical specification

Separator type

Volume (l)

Length

(mm)

Width

(mm)

Height

(mm)

Total height

(mm)

Input

(mm)

Output

(mm)

Input height

(mm)

Pipes

(mm)

Flow rate

(l/s)

800 1.500 750 800 1.300 620 675 680 Ø 110 1,6
1.200 1.500 850 1.000 1.500 620 675 880 Ø 110 2,2
2.000 2.000 1.000 1.100 1.600 620 675 980 Ø 110 3,0
2.500 2.500 1.000 1.200 1.700 635 700 1.065 Ø 125 6,0
3.500 2.750 1.100 1.200 1.950 920 1.000 1.030 Ø 160 10,0
5.000 3.000 1.250 1.300 2.050 950 1.050 1.100 Ø 200 20,0
6.000 3.500 1.300 1.350 2.100 1.000 1.125 1.100 Ø 250 30,0
10.000 4.500 1.500 1.500 2.250 1.000 1.125 1.250 Ø 250 40,0
15.000 6.000 1.500 1.500 2.500 1.325 1.485 1.175 Ø 315 60,0
20.000 6.000 2.000 2.000 3.000 1.325 1.485 1.675 Ø 315 80,0
25.000 6.000 2.250 2.000 3.000 1.410 1.610 1.590 Ø 400 100,0
30.000 7.000 2.250 2.000 3.000 1.510 1.760 1.490 Ø 500 125,0
35.000 8.000 2.250 2.250 3.250 1.250 1.500 2.000 Ø 500 150,0
40.000 9.000 2.500 2.500 3.500 1.300 1.600 2.200 Ø 600 200,0
50.000 10.000 2.500 3.000 4.000 1.300 1.600 2.700 Ø 600 250,0