Bypass separator

The Tehnix separator is completely made according to HRN EN 858 with integrated precipitator and coalescent insert. It is entirely in the function of environmental protection and groundwater conservation.It is foreseen for the separator to be installed in the ground by burying (only the service covers remain on the ground level), but there is a possibility of surfaced installation. Slide throats adapt to the terrain. By performance, the separator belongs to the 1st class (EN 858). The residual oil concentration in the output water is less than 0.5 mg / liter of water.
The separator is protected from corrosion by special tar epoxy resins.Maintenance is minimal and it includes controlling the amount of oil in the separator and a disposal of the separator content.

Bypass separators are designed for installation on locations with minimal rainwater pollution. The bypass is built in a ratio of 1:5 or according to the project requirements. Water purification quality at the output is less than 5 miligrams per liter.

Send inquiry

Technical specification

Tip Volumen (l)	Dužina L (mm)	Širina B (mm)	Visina H (mm)	Ukupna visina h (mm)	Ulaz U (mm)	Izlaz I (mm)	Visina ulaza VU (mm)	Cijevi ØD (mm)	Protok Q (l/s)
2000	2000	1000	1100	1600	635	700	890	200	3+12=15
2500	2500	1000	1200	1700	670	735	940	250	6+24=30
3500	2750	1100	1200	1950	960	1050	940	250	10+40=50
5000	3000	1250	1300	2050	1000	1100	975	315	20+80=100
6000	3500	1300	1350	2100	1075	1235	940	400	30+120=150
10 000	4500	1500	1500	2250	1065	1220	1090	400	40+160=200
15 000	6000	1500	1500	2500	1160	1360	990	500	60+240=300
20 000	6000	2000	2000	3000	1160	1360	1490	500	80+320=400
25 000	6000	2250	2000	3000	1160	1360	1700	600	100+400=500
30 000	7000	2250	2000	3000	1610	1810	1700	600	125+500=625
35 000	8000	2250	2250	3250	1300	1600	1850	800	150+600=750
40 000	9000	2500	2500	3500	1400	1800	2100	800	200+800=1000
50 000	10 000	2500	3000	4000	1400	1800	2600	800	250+1000=1250
80 000	12 000	2500	3000	4000	1600	1800	2600	800	300+1200=1500