Special separator

Special separators are designed for separating oil and grease, sediment, sand, gravel and ash from rainwaters or processed oily water.

The Tehnix separator is completely made according to HRN EN 858 with integrated precipitator and coalescent insert. It is entirely in the function of environmental protection and groundwater conservation. Usually, this kind of separator is installed in the ground (only the service covers remain on the ground level), but there is a possibility of installation above the ground. Slide throats adapt to the terrain configuration. The separator is made in compliance with Croatian and European norms (HRN EN 858). The residual oil concentration in the outlet water is less than 0.5 mg / l.

The separator is protected against corrosion with special tar epoxy resins.

Maintenance is minimal and is reduced to controlling the amount of oil in the separator and disposing of the separator content.

Send inquiry

Technical specification

Cylindrical type Diameter  (mm) Length (mm) Total height (mm) Inlet (mm) Outlet (mm) Pipes

(mm)

Flow (l/s)
2 500 1 250 2 650 1 850 635 695 Ø 125 6
3 500 1 250 2 740 1 850 670 750 Ø 160 10
4 500 1 600 2 450 2 200 710 810 Ø 200 15
5 000 1 600 2 820 2 200 60 810 Ø 200 20
6 000 1 600 3 740 2 200 760 885 Ø 250 30
10 000 1 600 5 350 2 200 875 1 000 Ø 250 40
15 000 1 600 8 570 2 250 875 1 025 Ø 315 60
20 000 2 000 6 960 2 650 910 1 060 Ø 315 80
25 000 2 000 8 450 2 650 810 1 010 Ø 400 100
30 000 2 000 10 120 2 650 850 1 100 Ø 500 125
35 000 2 500 7 500 3 200 850 1 100 Ø 500 150
40 000 2 500 8 800 3 200 850 1 150 Ø 600 200
50 000 2 500 10 800 3 200 850 1 150 Ø 600 250
80 000 2 900 12 100 4 000 1 400 1 800 Ø 800 300